17
Step 7: Assemble handle
a) Loosen the four screws (M8x1.25x16mm)(95) and four spring washers (M8)(74), which
are pre-mounted on the console mast (5).
b) Mount the handle (6) on the console mast (5) with four screws (M8xp1.25x16mm)(95)
and four spring washers (M8)(74).
c) Mount the console cover (33) on the console (31) with four screws (M5xp0.8x15mm)(87).
d) Mount the upper (34) and lower handle cover (35) on the console mast (5) with three
screws (M4x20mm)(85) and two screws (M5x0.8x15mm)(87).
Step 8: Assemble armrests
a) Mount the armrests (28) on the handles (6) with two screws (M6x1.0x12mm)(102).
To Next Page
Loading...