3
Models 340/341/342
Introduction
This unit must be installed on a level surface
to avoid the hazard of tipping. Extreme care should be
taken in moving this equipment for any reason.
T wo or more people are required to safely move this
unit. Failure to comply may result in personal injury or
equipment damage.
This unit must NOT be installed in an area
where a water jet or hose can be used. NEVER use a
water jet or hose to rinse or clean this unit. Using a
water jet or hose on or around this equipment may
result in electrocution to the user or damage to the
equipment.
Cleaning and sanitizing schedules are
governed by your state or local regulatory agencies
and must be followed accordingly. Please refer to the
cleaning section of the Operator Manual for the proper
procedure to clean this unit.
To Next Page
Loading...
Need help?
General
