EasyManuals Logo

Taylor 342 Service Manual

Taylor 342
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
4
Introduction
Models 340/341/342
Model 340 Specifications
Freezing Cylinder
One, 7 quart (6.6 liter) capacity.
Mix Hopper
One, 20 quart (18.9 liter) capacity.
Beater Motor
One, .25 hp. motor.
Refrigeration Unit
115V: One, approximately 6,000 BTU/hr. R404A.
All other electrical characteristics: One, 7,500 BTU/hr .
R404A. (BTU’s may vary, depending on compressor
used.)
Electrical
Electrical
One dedicated connection.
Maximum
Fuse Size
Minimum
Circuit Ampacity
115/60/1 Air 30 20
115/60/1 Water 25 18
208--230/60/1 Air 20 14
208--230/60/1 Water 20 14
220--240/50/1 Air 15 11
For exact electrical information, always refer to the
data label of the unit.
Air Cooled
Clearance: 6” (152 mm) around both sides. It is
recommended to install a skirt to one side of the unit
and place the back of the unit against a wall.
Water Cooled
W ater inlet and drain connections under side of base
3/8” FPT.
Dimensions
Width: 18--7/16” (468 mm)
Depth: 31” (787 mm)
Height: 36--3/8” (924 mm)
Counter Clearance: 4--1/4” (108 mm) mounted on
standard legs.
Approximate Weights
Net: 253 lbs. (114.8 kgs.)
Crated: 321 lbs. (145.6 kgs), 20 cu. ft. (.56 cu. m.)
Specifications are subject to change without notice.
This unit is designed and constructed to meet stringent
safety and sanitation requirements for NSF, UL, and
CSA.

Other manuals for Taylor 342

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Taylor 342 and is the answer not in the manual?

Taylor 342 Specifications

General IconGeneral
BrandTaylor
Model342
CategoryFreezer
LanguageEnglish

Related product manuals