Taylor 428 - Section 2: Systems and Controls

9
Model 428 Operator Parts Identification
120614
Beater Door Assembly With Standard Door (No Prime Plug)
ITEM DESCRIPTION PART NO.
1 PIN A.-VALVE HANDLE X25929
2 VALVE-DRAW SLUSH 047734
3 O-RING-1”OD X .139W 032504
4 HANDLE A.-DRAW-SLUSH-BLK X47384
5 NUT-STUD 029880
6 DOOR A.-PARTIAL X39248-SER
7 BUSTER-ICE 047735
8 O-RING-.291 ID X .080W 018550
9 ARM-TORQUE 052450
10 TORQUE A. X14488
ITEM DESCRIPTION PART NO.
11 BEARING-GUIDE 014496
12 GASKET-DOOR 5.109”ID 014030
13 BEARING-FRONT 013116
14 BEATER A.-7QT-1 PIN X46233
15 SHAFT-BEATER 035418
16 SEAL-DRIVE SHAFT 032560
17 O-RING-7/8 OD X .139W 025307
18 BLADE-SCRAPER-PLASTIC 046237
19 CLIP-SCRAPER·BLADE 8.75” 046238
*NOTE: OPTIONAL TORQUE A. = X27027-1