28
Model 428Important: Operator Checklist
Winter Storage
If the place of business is to be closed during the
winter months, it is important to protect the freezer
by following certain precautions, particularly if the
building is to be left unheated and subject to freezing
conditions. Disconnect the freezer from the main
power source to prevent possible electrical damage.
Your local Taylor Distributor can perform this service
for you.
Wrap detachable parts of the freezer such as beater,
blades, drive shaft, and freezer door, and place in a
protected dry place. Rubber trim parts and gaskets
can be protected by wrapping with moisture-proof
paper. All parts should be thoroughly cleaned of
dried mix or lubrication accumulations which attract
mice and other vermin.
To Next Page
Loading...
