Section 9
9-1
Models 60 and 62
Parts Replacement Schedule
9
Parts Replacement Schedule
Table 9-1
Tune−up kits are available from your Taylor distributor. Keep your freezer in top condition with the above replacement
parts in a Tune−up kit for your model of freezer. Ask your Taylor distributor about the Automatic 3-Month Tune-Up
Kit Mailing Program.
Part Description Every 3 Months Every 6 Months Annually Qty.
Driveshaft Seal X 1
Scraper Blades Inspect and
replace if
necessary.
Minimum 2
Front Bearing X 1
Freezer Door Gasket X 1
Draw Valve O-rings X 2
Torque Rotor Guide Bearing X 1
Torque Rotor O-rings X 2
Feed Assembly O-ring X 2
Double Ended Brush Inspect and replace if
necessary.
Minimum 1
Black Bristle Brush, 1” x 2” Inspect and replace if
necessary.
Minimum 1
Bristle Brush, 1-1/2” x 2” Inspect and replace if
necessary.
Minimum 1
Bristle Brush, 3” x 7” Inspect and replace if
necessary.
Minimum 1
To Next Page
Loading...
