OPERATOR PARTS IDENTIFICATION
4-9
Models 8752, 8756, and 8757
Operator Parts Identification
4
Accessories
Figure 4-6
*Note: A sample of sanitizer is shipped with a new machine.
Order additional sanitizer, using one of the part numbers listed.
Apply the appropriate
Taylor approved food safe lubricant.
Item Description Part No.
1Brush−Mix Pump Body-3 x 7 023316
2Brush−Pressure Switch-1/8” 027647
3Brush−Feed Tube 9/16 x 44 021101
4Brush−Double Ended 013072
5Brush−Rear Bearing 1 x 2 x 14 013071
6Brush−Draw Valve 1 x 2 x 17 013073
7 Brush Set−LVB 050103
8 Lubricant−Taylor 4 oz. 047518
Item Description Part No.
9* Sanitizer−Stera Sheen See Note
10 Pail−10 qt. 013163
11
Kit A.−Tune Up-1 Spout (8752) X49463-15
Kit A.−Tune Up-3 Spout
(8756 and 8757)
X49463−2
12 Kit A.−Mix Level Probe Socket X35813