Taylor C300 Operator's Manual

5-6
USER INTERFACE
Model C300
User Interface
5
Press the MENU (SEL) key to return to the operator
menu.
Screen F—CURRENT CONDITIONS
This screen displays the current viscosity, product
temperature, and pressure for each freezing cylinder. An
asterisk will indicate which side is refrigerating. Press the
MENU (SEL) key to return to the operator menu.
Note: Viscosity is checked only when product
temperature is below 40°F (4.4°C).
Screen G—FAULT HISTORY
This option provides a record of the last 20 faults. The
display also indicates the date and time each fault
occurs.
Press the AUTO (- ->) and OFF (<- -) keys to increase or
decrease the fault page.
Page numbers are located in the upper right-hand corner
of the display. The most recently recorded fault will
appear on page 1. The fault description is listed on the
third line of the fault page.
Press the AUTO (- ->) key to move to the next screen.
The next screen will indicate when the fault was satisfied.
Press the MENU (SEL) key to return to the operator
menu.
Screen H—RINSE/SANITIZE
This screen allows the operator to rinse or sanitize the
freezing cylinder(s).
Use the AUTO (- ->) and OFF (<- -) keys to select either
RINSE or SANITIZE, and then press the MENU (SEL)
key.
Use the cursor keys to select YES or NO, then press the
MENU (SEL) key.
Repeat for the right side of the unit.
DEFROST TIME RIGHT
CYCLE 1
SUN 10:00
<-- --> +++ --- SEL
CURRENT CONDITIONS
L*1200Hd 27.3F
R*1200Hd 27.3F
SEL
1YROTSIHTLUAF
43:8060/52/01
NO FAULT FOUND
<-- --> +++ --- SEL
2YROTSIHTLUAF
10/25/06
33:80WOLSSERPPURYSR
<-- --> +++ --- SEL
2YROTSIHTLUAF
91:60:4160/52/01
RESTORED FROM FAULT
PAGE 2 + + + - - - SEL
RINSE / SANITIZE
RINSE SANITIZE EXIT
---
LES>----<
SANITIZE
LEFT SIDE YES NO
---
LES>----<
SANITIZE
RIGHT SIDE YES NO
---
LES>----<

Taylor C300 Specifications

General

Brand	Taylor
Model	C300
Category	Commercial Food Equipment
Language	English