Taylor C722 User Manual

5-6
USER INTERFACE
Model C722
User Interface
5
Menu Options
Press the Arrow symbols to move up or down through
the Menu. Select a Menu option by pressing the SEL
symbol. Exit the Menu program by selecting EXIT FROM
MENU or press the Cone symbol
(Menu Display).
The following menu options are listed in the Manager's
Menu.
• EXIT FROM MENU
• SERVINGS COUNTER
• SET CLOCK
•AUTO START TIME
•STANDBY MODE
• MIX LEVEL AUDIBLE
• FAULT DESCRIPTION
• FAULT HISTORY
• LOCKOUT HISTORY
• SYSTEM INFORMATION
• CURRENT CONDITIONS
• NET SERVICE PIN
Selecting EXIT FROM MENU will exit the Manager's
Menu and then return the control panel symbols to
normal operation.
The SERVINGS COUNTER screen is used to reset the
servings counter to zero.
Note: The SERVINGS COUNTER automatically resets
to zero when the machine is brush-cleaned.

Reset the SERVINGS COUNTER by selecting the SEL
symbol to advance to the next screen. Select the Up
Arrow symbol to move the Arrow cursor(>) to Yes and
press the SEL symbol. The SERVINGS COUNTER will
reset to zero and exit back to the Manager's Menu.
The SET CLOCK screen allows the Manager to adjust
the control clock date and time. The date and time may
only be changed after the freezer has been manually
cleaned, but before it has been placed in the Auto or
Standby mode. The following message will be displayed
if the SET CLOCK option is selected when the machine
is not in a brush-clean state.
To change the date or time, select the SET CLOCK
option in the menu. Press the Up Arrow symbol to
advance the arrow cursor from Exit to Change, then
press the SEL symbol to select the Change option.
Change the time by pressing the Up Arrow symbol with
the cursor under the hour position. Move the cursor to the
minutes position by pressing the SEL symbol. Once the
correct minutes are entered, press the SEL symbol to
advance the cursor to the month.
Enter the correct month, day, and year. After they have
been entered, press the SEL symbol to advance to the
DAYLIGHT SAVING TIME (DST) screen.
SERVINGS COUNTER
00 0
> Next
Reset Counters
ARE YOU SURE?
Yes
>No
SET CLOCK
12:01 2/10/2012
NO CHANGES ALLOWED
Press Any Key
SET CLOCK
12:01 2/10/2012
Change
> Exit
SET CLOCK
12
:01 2/10/2012
> Exit
DAYLIGHT SAVING TIME
ENABLED
> Enable
Disable

Taylor C722 Specifications

General

Brand	Taylor
Model	C722
Category	Freezer
Language	English