NEMO series battery to battery Charger
18
8. Specification
Model NEMO series battery to battery charger
Electrical
Input nominal voltage 12 \ 24VDC
range (smart type)
12V ALT:12-16VDC, low voltage protection at 11.6V
24V ALT:24-32VDC, low voltage protection at 23.2V
Alternator input voltage
range (conventional type)
12V ALT:13.2-16VDC, low voltage protection at 12.8V
24V ALT:26.4-32VDC, low voltage protection at 25.6V
Automatic activation -D+ Yes
PV input voltage range
(DDX and IDDX models)
12V ALT:12 to 25VDC,
24V ALT:24 to 50VDC
Output nominal voltage 12 \ 24VDC
Charge current
12V AUX battery:15A \ 30A
24V AUX battery:15A
Efficiency Max 97%
Standby current
≤ 5mA
Communication
(IDX and IDDX models)
RS485
Battery type AGM \ GEL \ LFP \ WET
Temperature compensation Yes
Voltage compensation Yes
Charge algorithm TBB premium II multi stages
Protection
Charger over temperature/Battery over temperature/Over
load/ Short circuit / Battery low voltage(below 2V)
Operating temperature
-20 to +60℃
Enclosure
Material Aluminum with anodized, flame proof plastic
Battery connection M8
Protection category IP63
Weight 0.9kg
Dimension 186.3*102.3*60mm
Standards
To Next Page
Loading...
Need help?
General
