TC-Helicon Voicelive 2 User Manual

can help considerably.
To see if phase reversal will help, stand where you will
perform in relation to your monitor and carefully turn
up the level of your guitar with your guitar’s onboard
volume control until it starts to feed back. Note the
volume if the control has an indication then turn down
the volume and adjust the phase reverse control in
VoiceLive 2. Return to standing position and adjust your
guitar volume to the level that caused the feedback. If
this didn’t work, guitar monitor level or overall (guitar
and vocal effects) will have to be reduced.
REVERB STYLE
The Reverb processor accurately simulates acoustic
spaces around your guitar. This is an entirely separate
processor from the one used for the vocal processing.
It does, however, offer the same style selection but with
no Style editing.
Use the Data Wheel to scroll down to this row and turn
the Mix/Edit control beneath the parameter to audition
the Reverb styles. There are 30 styles to choose from
covering everything from tight ambience to giant arenas.
The factory default style is called SMOOTH PLATE.
REVERB LEVEL
Turn the Mix/Edit knob below this parameter to raise
and lower the amount of Reverb on your guitar from
the factory default of -30 dB.
UMOD STYLE
Scroll down to this row and use the Mix/Edit knob to
change μMod (Micromod) style for the guitar. As with
Reverb, this effect processor is entirely separate from
the vocal μMod processor while offering the same style
selection. No μMod style editing is possible for guitar.
The factory default style, MICROMOD CLONE offers a
gentle stereo detune effect.
UMOD LEVEL
Turn the Mix/Edit knob below this parameter to raise or
lower the amount of μMod effect on your guitar. The
factory default mix level is -12 dB.
The Global Controls: Guitar FX
50

TC-Helicon Voicelive 2 Specifications

Operating Environment

operating temperature	32° F to 122° F (0° C to 50° C)
storage temperature	-22° F to 167° F (-30° C to 70° C)
humidity	Max. 90 % non-condensing

Power

external power supply mains voltage	100 to 240 VAC, 50 to 60 Hz
power consumption	<14 W

Analog Inputs

mic input impedance	2.14/1.07 kOhm
line input impedance	13/6.5 kOhm
guitar input impedance	1 MOhm

Analog Outputs

output impedance	100/50 Ohm
output range	16 dBu / 0dBu
dynamic range	> 109 dB, 20 Hz to 20 kHz

Weight and Dimensions

dimensions	13.8" x 3" x 8.5" (350 x 76 x 216)
weight	5 lb. (2.3 kg)