EasyManuals Logo
Home>TC-Helicon>Recording Equipment>Voicelive 2

TC-Helicon Voicelive 2 User Manual

TC-Helicon Voicelive 2
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #71 background imageLoading...
Page #71 background image
o UNISON - All 8 voices are triggered from a single
MIDI note. This is similar to a synthesizer mode of
the same name where you can layer all voices on
one note.
ATTACK / RELEASE
These settings are designed to introduce fade ins and
fade outs to the harmony voices. The Attack parameter
provides a gentle volume fade-in when you strike a
MIDI note during a sustained sung note. The Release
parameter adds a smooth fade-out if you release your
MIDI note as you continue to sing. The values range
from 0 to 1000 milliseconds for the Attack and 0 to
2000 ms for the Release.
NOTES EXT
This feature is most useful when singing to a commercial
MIDI file that is controlling the harmony voices in
VoiceLive 2. Often the MIDI notes used to control
harmony cut off where the singer might prefer to
hold the notes longer and this makes for a more
singer-oriented MIDI performance. The Notes Extension
setting allows a harmony voice that has been triggered in
Notes mode to continue sounding while the singer sings
a sustained note after the MIDI note has ceased.
NATURALPLAY = MIDI NOTES Mode
only
GENDER, PAN, PORTA, SMOOTH, and Voice
LEVEL
The ability to control voices individually is removed in
MIDI NOTES mode to simplify and reduce the number
of parameters required when 8 voices are active. In
their place are macro-type settings for the features listed
above. For individual control of 4 MIDI voices, you can
use MIDI 4 CHAN mode.
The Edit Menu: HARMONY Tab
71

Table of Contents

Other manuals for TC-Helicon Voicelive 2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TC-Helicon Voicelive 2 and is the answer not in the manual?

TC-Helicon Voicelive 2 Specifications

Operating Environment IconOperating Environment
operating temperature32° F to 122° F (0° C to 50° C)
storage temperature-22° F to 167° F (-30° C to 70° C)
humidityMax. 90 % non-condensing
Power IconPower
external power supply mains voltage100 to 240 VAC, 50 to 60 Hz
power consumption<14 W
Analog Inputs IconAnalog Inputs
mic input impedance2.14/1.07 kOhm
line input impedance13/6.5 kOhm
guitar input impedance1 MOhm
Analog Outputs IconAnalog Outputs
output impedance100/50 Ohm
output range16 dBu / 0dBu
dynamic range> 109 dB, 20 Hz to 20 kHz
Weight and Dimensions IconWeight and Dimensions
dimensions13.8" x 3" x 8.5" (350 x 76 x 216)
weight5 lb. (2.3 kg)

Related product manuals