HM10 Home AC Charger Mobile Application (APP) User Guide
Safety Information
For your own safety and the safety of others as well as to prevent damage to the device and vehicles
upon which the device is used, it is important that the safety instructions presented throughout
this manual be read and understood by all persons operating or coming into contact with the
device.
Safety Instructions
The safety messages herein cover situations BLUEVIEW is aware of. BLUEVIEW cannot know,
evaluate, or advise you as to all the possible hazards. You must be certain that any condition or
service procedure encountered does not jeopardize anyone’s personal safety.
SAFETY WARNINGS
Read all the instructions before you use this device.
Do not install or use the device near materials, chemicals, or vapors that are flammable,
explosive, harsh, or combustible.
Turn off the power at the circuit breaker before installing or cleaning the device.
Children around this device should be supervised when the device is in use.
This device must be grounded through a permanent wiring system or an equipment-
grounding conductor.
Use the device only within the specified operating parameters.
Do not use the device if it is defective, appears cracked, frayed, broken or otherwise damaged,
or fails to operate.
Do not use the device if the flexible power cord or EV cable is frayed, broken, or otherwise
damaged, or if it fails to operate.
Do not attempt to disassemble, repair, tamper with or modify the device.
Handle the device with care during transportation. In order to prevent damage to it and to any
of its components, do not subject it to strong force or impacts, pulls, twists, tangles, or drags.
Do not step on the device.
Do not insert fingers or foreign objects into any part of the device.
To Next Page
Loading...