Brewing coffee
16 Brewing coffee
1. Press the On/Off button .
The button flashes and the heating up process starts.
As soon as all the indicator lights remain permanently lit
the machine is ready. Additionally, a short signal will
sound.
If the indicator light “Water tank empty” flashes, fill
water into the tank.
2. Insert a capsule into the capsule holder.
The capsule must be intact:
do not pierce it and do not remove the lid!
3. The stop
leve
r must be folded up.
Slide the capsule holder into the machine and press the
stop lever down as far as it will go.
While the machine heats up a few drops
of water may drip from the capsule holder.
This is normal and harmless.
1.
2.
To Next Page
Loading...
