33 Cleaning
Cleaning the steam wand and frother nozzle
WARNING – risk of burns due to hot machine
parts
The steam wand and the metal parts of the
frother nozzle get very hot during use.
• Let the machine cool completely before
cleaning it.
1. Remove the
frother
nozzle from
the steam
wand by
pulling it
downwards.
2. Dismantle
the frother
nozzle into
its 3 parts
and rinse
them thor-
oughly.
3. Wipe the steam wand
clean. If the steam
wand is clogged, which
seldom happens, clean
the opening with the
help of a pin or similar
implement.
4. Reassemble the
frother nozzle.
5. Push the frother nozzle
onto the steam wand
as far as it will go.
Cleaning the floater, drip tray and grid
The floater, drip tray and grid can be washed up by hand
or cleaned in the dishwasher. Put the floater into the
cutlery basket.
1. Clean the floater, drip tray and grid and dry them.
2. Put the floater back into its mounting in the drip tray.
3. Fit the drip tray and grid back together again and place
the drip tray as far back as possible into the machine.
It must
be p
ushed in as far as it will go. Ensure that it
has been inserted properly.
To Next Page
Loading...
