27 Hot water to preheat cups
Hot water to preheat cups
This is a function that comes in handy when you want to
preheat an espresso cup.
The machine is ready to dispense hot water when the
steam button lights up in white.
You can reach this stage in the following ways:
a) If the machine is switched off:
Press the On/Off button .
As soon as all the buttons remain permanently lit, a
short signal will sound and the machine is ready.
b) If coffee or espresso has bee
n p
repared previously:
As soon as all the buttons remain permanently lit, a
short signal will sound and the machine is ready.
c) If the steam function has been switched on previously:
Press the steam button . The button flashes white.
Release steam as described in the section
”Frothing milk” in ”After frothing — let off steam”.
Dispensing hot water
Place or hold a suitable receptacle beneath the frother
nozz
le a
nd slowly turn the steam knob anticlockwise
until it stops. Hot water is discharged from the frother
nozzle.
As soon as the desired quantity has been produced, turn
the steam knob clockwise as far as it will go to close it.
m
m
m
m
m
To Next Page
Loading...
