30 Rinsing with water after a long period of non-use
Rinsing with water after a long period of non-use
MAX
If the machine has not been used for more than 2 days,
stale water and air will be trapped in the system.
In rare cases, air can also have entered the system while
milk was being frothed. In this case, the next coffee that is
brewed will be very strong because too little water flows
through.
In these cases, the machine must be ventilated or rinsed
with water. Proceed as follows:
1. Fill cold water into t
he wa
ter tank up to the MAXimum
mark.
2. Press the On/Off button .
To Next Page
Loading...
