31 Rinsing with water after a long period of non-use / Automatic switch-off
3.
Place a receptacle beneath the steam nozzle.
Turn the steam knob anticlockwise until water is dis -
pensed from the frother nozzle into the receptacle.
Provided that the machine has already heated up,
it will begin by first emitting steam and then water.
4. As soon as the receptacle is filled with water, turn the
steam knob clockwise as far as it will go. The water
stops being dispensed.
Pour the wat
er away.
The machine is ready for use
again.
WARNING – risk of scalds due to hot water
splashes or steam
• The machine begins heating as soon as
it has been switched on. If you proceed
slowly, the water may already be hot.
Automatic switch-off
The machine features an automatic switch-off function.
It will switch off automatically if none of the buttons have
been pressed for 2 hours and the steam knob has not been
used. A signal will sound.
This is a safety function. Nevertheless, you should
always switch the machine off after use with the
On/Off button .
To Next Page
Loading...
