TCL Google TV 98C735 Series - Using more of your TV; Installing and Scanning Channels; Subtitle Settings Management; Network Wake Up

12
Chapter 4 Using more of your TV
2.
Select the Subtitle option and press OK to toggle
between on and o󰀨.
3.
Press to return to the previous menu.
Enabling Subtitle Languages on Digital TV Channels
1.
Press on the remote control, select
(Settings)
>
Channels & Inputs >
Channels > Subtitle > Digital
Subtitle Language 1st and press OK/Right to enter.
2.
Press Up/Down to select a subtitle language as
your preferred language and press OK to conrm.
3.
Press Up/Down to select Digital Subtitle
Language 2nd and press OK
/Right
to enter.
4.
Press Up/Down to select a secondary subtitle
language and press OK to conrm.
5.
Press to return to the previous menu.
Selecting a Subtitle Type on Digital TV Channels
1.
Press on the remote control, select
(Settings)
> Channels & Inputs > Channels > Subtitle >
Subtitle Type and press OK/Right to enter.
2.
Press
Up/Down to select a subtitle type and press
OK to confirm. You can select Hearing Impaired
to display the hearing impaired subtitles with your
selected language.
3.
Press
to return to the previous menu.
Network Wake Up
(* not available for some models)
Note: This feature is only available in Google TV mode.
This function allows you to turn on your TV from standby
Installing Channels
This section describes how to search and store
channels automatically. This may be done in either of
the cases below:
- you are prompted that there are no channels in TV
mode;
- you want to update your channels.
1.
In TV mode, press on the remote control and
select
(Settings)
> Channels & Inputs >
Channels > Channel Scan. Press OK/Right to
enter.
2.
The TV installs and arranges channels according
to your country or region. Press Up/Down to select
Country/Region, and press OK to enter. Enter
the default password 1234 or your own password
in case you have changed the password in the
(Settings)
> System > Parental Controls menu.
Press Up/Down to select your country or region and
press OK to confirm.
3.
Press Up/Down to select Scan Automatically and
press OK to enter.
4.
Press Up/Down to select Channel type and
press Left/Right to select Digital, Analog or
Digital&Analog.
5.
After configuration is completed, press Down to
select Search and press OK to start scanning
channels.
6.
The channel search may take a few minutes. After
the automatic search, channels are arranged in a
preset order. If you wish to hide or move channels,
press
on the remote control, select
(Settings)
> Channels & Inputs > Channels > Channel
Organizer and press OK to enter.
Note:
If the channel search retrieved only the analogue
channels it could be caused by poor broadcasting and
therefore is not covered by manufacturer warranty.
Manufacturers cannot be held responsible for lack of or
poor broadcasting in some areas.
Using Subtitles
You can enable subtitles for each TV channel. Subtitles
are broadcast via Teletext or DVB-T digital broadcasts.
With digital broadcasts, you have the additional option
of selecting a preferred subtitle language.
Notes:
- Subtitle can also be enabled by pressing
button on
the remote control to display the virtual remote control
keyboard and select Subtitle directly.
- Some options are available only when Subtitle is set
to on.
Turning On/O󰀨 Subtitles
1.
Press on the remote control, select
(Settings)
> Channels & Inputs >
Channels > Subtitle
and
press OK/Right to enter.
mode via a network. To use this function, please make
sure:
1. Your TV is connected to an effective wireless home
network.
2. The desired controller, such as a smartphone, is
connected to the same network as your TV.
3. An app which supports network waking up function,
such as YouTube, has been installed into the
controller.
4. Network Standby is set to on in the Network &
Internet menu. In Google TV mode, press
on the
remote control, select
(Settings) > Network &
Internet > Network Standby, and press OKto turn
it on.
When the TV is in networked standby mode, you can
use the app to wake up the TV remotely.
Notes:
- This feature is disabled if you press and hold the
button on the remote control and conrm to shut the
TV down.
- Before using the feature of network wake up, make
sure Quick start is set to on.