13
Using more of your TV
Consumer Electronic Control (CEC)
Use this function to search for CEC devices connected
to the HDMI sockets in your TV and enable auto power
on and auto standby between the TV and CEC devices.
Enabling or Disabling CEC
1.
Press
on the remote control, select
(Settings)
> Channels & Inputs > Inputs
> Consumer
Electronic Control (CEC) and press OK/Right to
enter.
2.
Select the HDMI control option, and press OK to
toggle between on or o.
3.
Press to return to the previous menu
.
Using Auto Power On
Enables the TV to automatically power on when you
power on a CEC device (e.g. DVD) with the device’s
remote. Press OK to turn it on to enable this function.
Using Auto Standby
Enables all CEC devices to automatically go to the
standby mode when you turn o the TV with the TV
remote. Press OK to turn it on to enable this function.
Note: The CEC functions depend on the devices
connected and it is possible that some devices may not
interoperate correctly when connected to this TV. The
user manual or the manufacturer of the problematic
devices should be consulted for further information.
Variable Refresh Rate
Variable Refresh Rate is a feature that will allow smooth
gaming and eliminate screen tearing. The refresh rate
can dynamically change to up to 120hz.
Under source of HDMI1, HDMI2, HDMI3 or HDMI4 (the
number of HDMI socket on the TV will vary according to
TV model), press
on the remote control and select
(Settings)
> Channels & Inputs > Inputs
> Variable
Refresh Rate, and press OK to toggle between on or
off.
Notes:
- 4K@120Hz is only available on HDMI 1 or HDMI 2
- You need to make sure your Games Console can
support Variable Refresh Rate, and you may need
to check your games console settings to activate the
function.
- The game/content also will need to support Variable
Refresh Rate, and you may also need to check the
settings within the game.
MagiConnect
MagiConnect, formerly named T-Cast, lets you enjoy
plenty of videos, rich of applications, and share great
contents on large screen. It also allows you to turn a
smart device into a sophisticated remote control, provid-
ing more features than your normal TV remote control.
You can then control your TV through your smart
device.
Follow the on-screen instructions to scan the QR code
on the TV screen and download MagiConnect.
Note: Make sure the smart device and your TV are in
the same home LAN (local area network) or network
segment to use TV remote function.
Using EPG (Electronic Program Guide)
(*Certain option is available according to the software
version)
EPG is an on-screen guide that displays scheduled
digital TV programs. You can navigate, select and view
programs.
Note: The DTV EPG does not require an internet
connection.To use the DTV EPG, HbbTV must be set
to o. When HbbTV is set to on, then it will enter the
HbbTV EPG directly. Please refer to “ HbbTV ” part of
this manual for assistance to set HbbTV to on or o.
1.
Press
on the remote control, select
(Settings)
> Channels & Inputs > Channels > EPG
and press
OK to enter, or press
directly
(if available) on
the remote control, the Program Guide menu will
appear, which allows you to get information about
the current or next program playing on each channel.
Navigate through the different programs using the
Up/Down/Left/Right buttons on the remote control.
2.
Use the related buttons shown at the bottom of the
screen to view EPG.
- Filter: Program guide lter for digital TV programs.
• Press to display the type list of the program.
• Navigate through the dierent types using the
Up/Down buttons on the remote control.
• Select one or more types, which you want to
To Next Page
Loading...
