17
Using more of your TV
7. To exit the multi visual function, press
to display a
dialog box, then select OK and press OK
Notes:
- This feature is not available in any of the cases
below:
b) if the video from phone/DTV is scrambled.
c) when the capacity of required video decoding
exceeds 4K 60Hz.
- When in full screen mode, due to the compatibility
of the third party’s Apps, there might occur failure to
return to the dual views.
- At most 2 phones can be casted to the TV at the
same time. When in dual view mode, use Left/Right
to move the focus to TV view and then cast another
phone to the TV.
- To disable the feature, select
(Settings) >
System > Multi Visual Settings > Multi Visual and
press OK
- To check all available history list, select
(Settings)
> System > Multi Visual Settings > Connection
List and press OK to enter.
Gesture Control
(* not available for some models)
Allows you to control TV device by doing gestures in
Notes:
- This feature is available only when TV is equipped
with a camera of the designated type. For details,
please consult TCL Customer Service or your place
of purchase.
- Ensure the normal connection between the camera
and TV and that the toggle switch is set to
while
using this product.
- The camera powers on automatically when you start
corresponding applications on TV.
-
corresponding applications on TV.
- You may keep the slide cover closed when you are
not using the camera to protect the lens from dust.
Press
button on the TV remote control, select
(Settings) > Privacy > Gesture Control and press OK
to enter. Select your preferred gesture functions and
press OK to turn it on or off. To enable the function, you
need to follow the on-screen guide.
Note: In order to get good gesture experience, it is
advised to do the gesture under bright circumstances
and within a distance of 2 meters from the TV.
To Next Page
Loading...
