TCL Google TV 98C735 Series - Voice Assistant Features; Netflix & App Settings; System & Security Settings; Multi Visual Feature

16
Using more of your TV
Works with Alexa
To use the Works with Alexa function, you will need a
device like an Amazon Echo or Amazon Echo Dot (Sold
Separately). Set up your Amazon device. Then, on
your TV go to the Settings Menu, select System, and
select “Works with Alexa”. Then follow the on screen
prompts. Please note that within the Alexa app on your
phone, you will need to enable the TCL Assistant Skill,
through the Alexa Skills Menu.
Netix Settings
Netix provides on-demand movies and TV shows
delivered via the Internet. Netix is available in certain
countries.Unlimited membership is required. More
information can be found at www.netix.com <http://
www.netix.com/>.
Note: You can directly access Netix via clicking the
Netix button on the remote control.
Reset Shop
Allows you to reset the TV to factory default settings.
1. Press
on the remote control, select (Settings) >
System > About > Reset and press OK to enter.
2. Press
Up/Down to select Factory Reset and press
OK to enter. Then select Erase Everything and
press OK to conrm.
3. Enter 1234 or the PIN according to the on-screen
prompt.
4. Select OK and press OK to confirm.
5. The Initial setup wizard appears. Follow the
instructions in the section Initial setup.
Password in Parental Control
- The default password is 1234. You can change it to a
new one.
- The super password is 0423. If you forget your code,
enter the super password to override any existing
codes.
Using the Hands-free TV Voice Control
(* not available for some models)
Note: This feature is only available in Google TV mode.
Before using the hands-free TV voice control, connect the
TV to the network and make sure it can access the Goo-
gle website rst. Then follow the steps below to access.
1. Turn the built-in MIC switch (next to the power button)
to on before using this function.
1. In Google TV mode, press the Google Assistant
button on your remote.
2. Select “Yes, I'm in”.
3. Say “OK Google” or “Hey Google” to activate it.
Notes:
- The availability of hands-free TV voice control
depends on your region/country/language and your
model. For details, please refer to your local dealer.
- A quiet surrounding is required for better function
when using it. The recommended using distance is
within 2 meters in front of TV set.
- Turn the built-in MIC switch to o if you are not going
to use it.
- Standby power consumption will increase because
the built-in MIC is always listening when the Google
Assistant or voice control with the built-in MIC is
enabled.
Multi Visual
Allows you to enjoy di󰀨erent programs with your family
on one TV at the same time.
The multi visual function is enabled by default. To use
the function, make sure your phone is Android OS and
the WiFi on the phone is turned on. Then follow the steps
below to operate.
1. Press on the remote control, select (Settings) >
Network & Internet > Wi-Fi, and press OK to turn it
on.
2. Activate the cast screen function on your phone and
choose the TV’s name you want to connect in the
searching list.
3. For the rst time, depending on di󰀨erent types of
phones, there are two situations: 1) an invitation
prompt appears, select "Accept" and press OK to
connect. 2) enter a correct PIN code to connect as
per the PIN message on the phone.
4. Then dual views display and you can enjoy di󰀨erent
programs at the same time.
5. If you want to watch only one program, use Left/
Right to select your desired view and press OK to
enter the full screen.
6. To return to the previous dual view screen, press and
hold
on the remote control.