2-57
Fig. 2.149
Fig. 2.151
Fig. 2.150
■ REINSTALLATION
① Install the universal joint (1) on the spline
shaft (2) in the steering gear box. Then, install
the steering wheel assembly (5) on the front
guard (6) and secure it using the bushings (3)
and bolts (4).
21.2 N-m {2.16 kgf-m}
[15.6 lbf-ft]
② Install the lock bolt (1) and washer (2).
39.1 N-m {4.0 kgf-m}
[28.8 lbf-ft]
③ Install the steering wheel lock lever (2) on the
lock bolt (1). Then secure it using the washer
(3) and bolt (4).
15.6 - 23.4 N-m {1.6 - 2.4 kgf-m}
[11.5 - 17.3 lbf-ft]
To Next Page
Loading...
