TCS 3000 - Reports; Show Prover Status; Prover Ticket; Meter Info

10
System Menu
—Reports
1) SHOW PROVER STATUS
Selecting Show Prover Status allows you to view the last date and time of the last calibration.
2) PROVER TICKET
Selecting Prover Ticket allows you to print the prover information from the register.
3) METER INFO
Selecting Meter Information allows you to view the Meter Data, such as The Truck ID, Register ID, Meter Make, Meter
Model, Meter Version, and the Meter Serial Number. Information must be input within the Weights & Measures menu.
4) VERSION INFO
Selecting Version Info allows you to view the Version of Software and Firmware running on the TCS 3000.
5) MEMORY STATUS
Selecting Memory Status allows you to view the number and type of tickets printed by the TCS3000.
—System Settings
1) DISPLAY SETTINGS
DELIVERY SCREENS
Select Active Type Active Type allows you to set your DEFAULT display screen. Highlight the type
(type 1, 2, or 3) of screen you would like to view during delivery and start-up.
Configure Type 1 Using the arrow keys to move around the screen, highlight the field you would like
to change and select ENTER. The field options are in Table 1 below.
Configure Type 2 Using the arrow keys to move around the screen, highlight the field you would like
to change and select ENTER. The field options are in Table 1 below.
Configure Type 3 Using the arrow keys to move around the screen, highlight the field you would like
to change and select ENTER. The field options are in Table 1 below.
Empty No Data
Product Name (LPG, Diesel, Av Gas, Etc.)
Delivery Gross Non-Compensated Delivery Total
Delivery Net Compensated Delivery Total
Delivery Volume Amount of Delivery
Delivery Total Total Delivered
Flowrate Amount Delivered through Per Minute
AVG Temperature Average Temperature of Product
Temperature Temperature of Product
Mass Mass of the Product (e.g. Pounds per Gallon, etc.)
Preset Remain Remaining Preset (What is left of the Preset Total)
Preset Volume Preset Volume Amount for Delivery
Preset Amount Preset Currency Amount for Delivery
Density Density of the Product
TABLE 1