12
Weights & Measures
CUSTOM1 Allows you to customize the ticket
MAXIMUM Allows the maximum amount of space on the ticket.
MINIMUM Allows the minimum amount of space to be used on the ticket.
ONELINER Uses one line on the ticket.
SELECT PRINTER
Epson TMU 220/295 Epson slip or roll printer driver installed
Citizen CMP30 Citizen printer driver installed
Printek Printek printer driver installed
Blaster Blaster printer driver installed
Remote Selecting Remote will allow you to use a printer remotely when connected to the
register through a daisy chain RS485 serial communication.
None Selecting None will remove the communication for printing
PRINTER HOST
Printer Host is used when you plan to daisy chain multiple TCS 3000 registers together for
a single printer. Host is the primary meter and the Clients are all registers following the
Host.
Enable/Disable Host To Enable or Disable the Printer Host, highlight Enable or Disable and select
ENTER
- Enable will allow you to use Printer Host
- Disable will not allow you to use Printer Host
3) REGIONAL SETTINGS
DATE & TIME
Date Format MMMM DD, yyyy
MM/dd/yyyy
yy/MM/dd
dd/mm/yyyy
dd/mm/yy
Time Format 24 Hour Clock
12 Hour Clock AM/PM
Set Date Year — Format YYYY
Month — Select Month
Date — Select Date
Set Time Format time as Hours (input from 24 hr. clock) . Minutes . Seconds (HH.MM.SS)
NOTE: a period must be used as your divider
DECIMAL SYMBOL Select a ‘.’ period or a ‘,’ comma and press ENTER
4) DELIVERY SETTINGS
CONFIGURE TICKETS
Select Ticket Type Sets the DEFAULT for the delivery ticket. Choose from the following:
CUSTOMIZE TICKET
Customize Ticket allows you to customize the preconfigured information printed
on the delivery ticket. Choose from the following:
To Next Page
Loading...
