7
Select Function
SELECT FUNCTION MENU (Quick Guide)
Start Delivery Begins delivery transaction.
Show Last Delivery Shows the last delivery on the TCS 3000 screen.
Begin or End Shift Beginning Shift will take a record of Delivery information at the start
through the end of the user shift.
Duplicate Shift Ticket Duplicate Shift Ticket will print a duplicate of the Begin or End Shift.
Re-Print Tickets Will reprint past delivery transactions
Non-Printed Delivery Prints the last 75 transactions that have not printed.
Already Printed Delivery Reprints the last ### of transactions already printed
Shift Tickets Reprints the last ### of shift tickets.
System Menu Setup and Configuration MENU’S for TCS 3000
Reports Calibration Log / Identification and Software Version
System Settings Configuration of System Parameters, Printer and Auxiliary Devices
W&M Settings Product Setup and Calibration
Product Settings Product Activation, Price Settings and Device Time Settings
Advanced Functions System Software Update
SELECT FUNCTION — Start Delivery
1) START DELIVERY. Press START to begin delivery transaction. This will reset the register causing the
delivery screen to read 0.0. Start your delivery.
2) If a Preset or Customer ID Field is Enabled, the delivery process will begin with prompts requesting data input.
See Page 14 for Preset Settings and / or for Customer ID Field to Enable/Disable.
3) If a Multiple Tank Delivery is Enabled, the Operating Driver must Hold the Shift Key down while pressing the
START key. When the Multiple Tank Delivery begins, a multiple tank icon will be
displayed during delivery. See Page14 for Multiple Tank Delivery to Enable/Disable.
4) Finish the delivery. Press STOP once to PAUSE and twice to STOP. If the Printer is Enabled, the
ticket will be printed automatically. If the printer is not Enabled, it will be stored in memory
to be retrieved at a later date.
To Next Page
Loading...
Need help?
General
