TCS 3000 Operation Manual

17
Select Function
L2 Password Level two (2) password protection for System Settings.
Procedure to set L2 Password is as follows:
1. Highlight L2 Password and press ENTER.
2. Highlight Set Password and press ENTER.
3. Input alphanumeric password and press ENTER.
4. Confirm password entry by resubmitting password, and press ENTER.
NOTE: Alphanumeric password must be at least three (3) characters long.
Access Key
Access Key is used to lock or unlock the register keyboard when a Computer or
Handheld device is in use.
System Mode
System Mode is used for databases
Default Used for standard register mode
MR1 Used for database
User DB Update
Used to update the database.

TCS 3000 Specifications

General

Brand	TCS
Model	3000
Category	Measuring Instruments
Language	English