38
“Must Know” & How To
Start Up “Must Knows” for Setup Configuration & Calibration
1) Each Product must be thoroughly configured and calibrated in W&M Settings. There are many parameters that need
to be configured to ensure your system operates properly. Failure to complete the Product Configuration may result
in the TCS3000 to not function correctly.
2) Products that have been calibrated may appear either as an Active or Inactive Product. The TCS 3000 must have at
least 1 Active Product in order to Begin a Shift and Start a Delivery. Products may only be Activated or Deactivated
after a Shift has Ended.
3) The Calibration Screw must be threaded completely into the Calibration setting, or you will not be able to begin a
shift or start a delivery.
To Next Page
Loading...
