TE Connectivity T6112DS - Page 27

26
27
9 Conguration
Parameter Meaning Default
Pause reprint
Printing of another label with the information of the previous print job
by pressing the pause button. This function can be executed until the
print buffer is cleared with the cancel button.
Off
Barcode error
On: With faulty barcode contents or size specications, printing is
interrupted.
Off: Printing is not interrupted if an error occurs. If barcode contents
are faulty, the printer attempts to replace the incorrect data with valid
characters (e.g. zeros). If barcode size specications are faulty, a
gray area is printed instead of the barcode.
On
Width ASCII dump
Width of the printing area in the ASCII Dump test function. With the
Automatic setting, the printout of the control sequences arriving at
the printer occurs over the maximum printing width. The printing area
width can be reduced down to 50 mm.
Automatic
Table 12 Parameters of the menu Setup > Print param.