31
10.1 EC Declaration of Conformity
Gesellschaft für Computer-
und Automations-
Bausteine mbH & Co KG
Wilhelm-Schickard-Str. 14
D-76131 Karlsruhe,
Germany
EC Declaration of Conformity
We declare herewith that as a result of the manner in which the device designated below was designed, the type of construction
and the devices which, as a result have been brought on to the general market comply with the relevant fundamental regulations
of the EC Rules for Safety and Health. In the event of any alteration which has not been approved by us being made to any
device as designated below, this statement shall thereby be made invalid.
Description: Transfer printer
Device: T6112DS
Applied EC Directives and Standards
Directive 2006/95/EC relating to electrical equipment designed
for use within certain voltage limits
• EN 60950-1:2006+A1:2009
• EN 61558-1:2005+A1:2009
Directive 2004/108/EC relating to electromagnetic
compatibility
• EN 55022:2006+A1:2007
• EN 55024:1998+A1:2001+A2:2003
• EN 61000-3-2:2006+A1:2009+A2:2009
• EN 61000-3-3:2008
Signature for, and behalf of, the manufacturer :
cab Produkttechnik Sömmerda
Gesellschaft für Computer-
und Automationsbausteine mbH
99610 Sömmerda
Sömmerda, 21.05.12
Erwin Fascher
Managing Director
10.2 Other Licences
FCC
NOTE : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. The equipment generates, uses, and can radiate radio
frequency and, if not installed and used in accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user may be required to correct the interference at his own expense.
10 Licences
To Next Page
Loading...
