14
Instant recording
Record on demand whenever you need it.
1. To start recording, press the RECORD ( ) button on the remote control. While
recording, "REC" is shown on the unit's display.
2. To stop recording, press the STOP button.
RECORDING WHILE ON STANDBY
You can also put the unit on Standby Mode while still recording:
1. Press the POWER button. You will be asked whether you intend to stop recording or
continue recording.
2. Use the LEFT/RIGHT buttons to highlight your choice.
3. Press the OK button to confirm and turn the unit to Standby Mode. If recording is still in
progress, you can see that the "REC" is shown on the display.
Scheduled recording
Schedule recordings ahead of time – recording can even start while the unit is in Standby Mode,
so you don't need to keep it on.
SCHEDULE VIA EPG
This is a quick and easy way to schedule recordings according to programs available in the
EPG, which lists the broadcast schedule up to 7 days in advance.
1. In DTV Mode, press the EPG button.
2. Using the UP/DOWN/LEFT/RIGHT buttons, find the desired program and highlight it.
3. Press the RED button and a red "REC" icon will show on the program.
Note: If you are trying to schedule too many recordings at once, you will get an error message
from the Timer Conflict Manager. The twin tuner can record up to 2 different channels at the
same time.
To Next Page
Loading...
