Teac HDR2250T - Recording Programs (PVR)

13
RECORDING PROGRAMS (PVR)
Note: By default, this unit uses the built-in hard drive. If you choose to record to an external
drive (like a flash drive or hard disk drive in FAT32 format), it must be compatible, connected
and running. You can change the location of the recorded program in the PVR Settings menu.
NOT all USB devices, such as phones, MP3 players, cameras, and the like, are compatible with
recording TV programs. We recommend using USB Flash Drives, or external HDDs with a
separate power supply.
RECOMMENDED: Format the data storage unit before doing any recording to ensure that it is
in the correct file system format and that there is enough data space for recording.
WARNING: Ensure that no valuable information is currently stored in the connected data
storage unit, as the formatting process means that ALL DATA will be ERASED. TEAC does not
take responsibility for lost data. While recording functions are running, DO NOT disconnect the
data storage unit, to avoid damage or data loss.
PVR Settings
If you need to check or adjust the PVR settings, follow the steps below:
1. Press the MENU button and go to the PVR menu with the LEFT/RIGHT buttons.
2. Highlight "PVR Setting" with the UP/DOWN buttons and press OK.
3. Highlight menu items with the UP/DOWN buttons and adjust with the LEFT/RIGHT
buttons.