Getting ready
Getting set up and ready to fly is a quick and simple task. In most cases plug&play when using TBS
equipment.
FAQ
If you got any question after reading this manual you should visit the TBS FAQ section
Note
This manual is written based on FUSION
FW 2.16 and WiFi FW 1.41
. If some functions are not available for
you, please update your Fusion and WiFI module.
Some features include a connection to the TBS R/C systems. Make sure there firmware is up to date:
Crossfire 4.11 or Tracer 5.07
Updating
In order to update and configure your Fusion module, you need the TBS Agent X, which you can download
from the TBS shop.
To update the module, connect it by the USB-port and run the update by Agent X.
For detailed instructions on how to use the Agent X, have a look at the Agent X manual.
To Next Page
Loading...
Need help?
General