6 44 1705 001GB-H FMT 3 meter
Waters protection
The device has been designed to handle water hazardous substances. It must be operated in such a
way that contamination of water bodies is excluded. The relevant valid local regulations have to be
observed!
Hydraulics
Only persons with special knowledge and experience with hydraulic systems may carry out work on
hydraulic parts and equipment. All lines, hoses and screw joints should regularly be checked for
leaks and visible external damage. Any damage must be rectified immediately. Any oil spurting out
can cause injuries and fire. The relevant safety regulations for the product must be followed when
handling oils, greases or other chemical substances!
Maintenance and Service
According to the regulations of the water resources law only authorized services may work on
devices for flammable and/or water endangering substances. During such works, appropriate tools
are to be used (avoid sparking). Before any kind of work on the device, all fuel lines are to be
completely emptied and aerated.
Do not make any changes. Modifications or additions to the device which may affect the safety
cannot be carried out without consent of the manufacturer. Exclusively genuine spare parts made
by the manufacturer may be used.
Electric power
Work on the electrical equipment may only be carried out by a qualified electrician or by trained
persons under the guidance and supervision of a qualified electrician according to electro-technical
guidelines. Machine or system components, on which inspection, maintenance or repair work is to
be carried out must be de-energised.
To Next Page
Loading...