To Next PageTo Next Page
Need help?Do you have a question about the TechBook in.touch 2 and is the answer not in the manual?
General| Brand | TechBook |
|---|---|
| Model | in.touch 2 |
| Category | Remote Control |
| Language | English |
Proper disposal of the appliance according to local waste legislation.
Lists required modules, spa packs, and application compatibility.
Details router requirements and home transmitter power supply needs.
Introduces the system, its setup ease, communication, and app capabilities.
Explains the ease of connecting the spa via Wi-Fi with pre-paired transmitters.
Details the proprietary RF technology for stable, long-range signals.
Highlights the app's features for remote control and status updates.
Visual breakdown of the EN (home) and CO (spa) modules with key features.
Provides detailed physical measurements for both the EN and CO modules.
Guidance on installing the spa module, including placement and mounting tips.
Instructions on connecting the CO module to the spa pack's CO port.
Guidance on installing the home module near the router, including placement advice.
Steps for connecting the EN module to the router via Ethernet and power.
Detailed procedure for pairing the home and spa modules if needed.
Explains LED indicators for the home module (Pairing, Router, Server, Functional).
Explains LED indicators for the spa module (Pairing, Controller, Server, Functional).
Instructions on finding and installing the in.touch 2 app from the App Store.
Explains app use on home network/internet, Wi-Fi setup, and launching.
Covers selecting spa, home page, spa state, water care, and schedules.
Details Wi-Fi, network, tips, units, and about sections within app settings.
Explains LED status indicators (Yellow, Red, Green, Blue) for the home module.
Explains LED status indicators (Yellow, Blue) for the spa module and blinking issues.
Addresses potential RF link issues and troubleshooting steps for blinking LEDs.
Details humidity, operating/storage temperatures, and water ingress protection.
Lists compatible spa system models manufactured from 2012 onwards.
Covers FCC, IC, and European compliance standards for the transceiver module.
Lists UL, CAN/CSA, and FCC certifications for North America.
Lists relevant IEC and EN standards for European and international markets.
