10
Application
Download application
The in�touch app allows you to control your spa using your home network or an Internet connection
anywhere in the world� The in�touch 2 app is waiting for you in the App Store for iOS devices— search
for « in�touch 2 » then click on it to install�
On your home network
It is possible to access your spa with the in�touch 2 app through your home network� To be able to see your in�touch 2 in
the application you need to connect your device to the same router (Wi-Fi network) than the one used to connect your
in�touch 2-EN module�
Go to the Wi-Fi settings section of your mobile device and choose the same network that your spa is connected to
(i�e� Home)� Once you've selected it, wait until your device confirms the connection�
On the Internet
The in�touch 2 allows you to use the Internet to control your spa from anywhere in the world� In order for them to
communicate, both the in�touch 2 module and your device must be connected to a network that allows access to the
Internet�
Once your in�touch 2-EN module is connected to the Internet (the LED status is blue), you can use your in�touch 2 app
any time your device is also connected to the Internet (wireless or cellular network), even if you are away from home�
To have access to your spa away from home, you will need to have previously linked your mobile device to your spa on
your home network�
Using the app
Internet CO Module EN Module
To Next Page
Loading...