16
Modifying schedules
Application
In this menu it is possible to add, remove or edit schedules of economy or filtration�
Touch the Economy tab to modify the economy schedules and Filter cycle tab for the filtration schedules�
You can add economy or filtration schedules by touching the « + » symbol�
To delete a schedule, touch the garbage can icon at the right end of the desired line�
You can modify the programmed schedules by selecting one and adjusting the schedule�
You have several possibilities for the schedule (Mon-Fri, weekend, every day, or single days)� The schedules will be
repeated weekly� The time and duration are set in 30 minute increments� Once you have set the schedule, use the arrow
at the top of the page to go back� Ensure that you have selected the desired Water Care mode in the main Water Care
menu�
When an economy schedule is active, the set point will be reduced by 20°F, which means that the heating system will
not be engaged unless the temperature falls to 20°F below the spa's set temperature�
The filtration schedule is applied to the main filtration pump, most likely pump 1� If your spa uses a circulation pump
configured to run 24 hours, the screen will show purge schedules instead of filtration� The purges are pre-programmed
for a fixed number of minutes, therefore the duration will be set to N/A on the screen and only the start time can be
modified�
To Next Page
Loading...