6. Installation
This section contains unpacking, inspection, and installation instructions for the transmitter. Please read
the following sections carefully prior to setting up the equipment.
6.1. Unpacking and Inspection
Check the outside of the container. Carefully open the container and remove the power amplifier or
transmitter and any accessories. Retain all packing material that can be reassembled in the event that
the equipment must be returned to the factory.
Exercise care in handling equipment during inspection to prevent damage due to rough
or careless handling.
Visually inspect the enclosure of the power amplifier or transmitter for damage that may have occurred
during shipment. Check for evidence of water damage, bent or warped chassis, loose screws or nuts, or
extraneous packing material in connectors or fan failures. Inspect all connectors for bent connector pins.
If the equipment is damaged, a claim should be filed with the carrier once the extent of the damage is
assessed. Technalogix cannot stress too strongly the importance of immediate careful inspection of the
equipment and subsequent immediate filing of the necessary claims against the carrier if necessary. If
possible, inspect the equipment in the presence of the delivery person. If the equipment is damaged, the
carrier is your first area of recourse. If the equipment is damaged and must be returned to the factory,
phone for a return authorization number. Claims for loss or damage may not be withheld from any
payment to Technalogix, nor may any payment due be withheld pending the outcome thereof.
Technalogix cannot guarantee the carrier’s performance.
To Next Page
Loading...