Technaxx TX-108 User Manual

5
3. Quick operation guide
TX-108 camera can only be configured by iOS or
Android APP!
Start TX-108
 Connect the device with the MicroUSB power adapter to a socket, TX-108
starts automatically. Wait until the green indicator light is flashing. The prompt
voice will tell you when ready to start with the configuration via App.
 To download the App Security Premium from the Appstore or the Playstore
search for “Technaxx Security Premium” or scan the QR-code below.
[iOS 8.0 or above; Android 4.4 or above / EN, DE (07-2018)]
APP icon
iOS
Android
 Open the Security Premium App on your device.
 Register for user mode your data will be saved and can be restored. For
testing the App you can simply press App testing.
 After entering the App press the plus + symbol on the top right corner and
choose Add device
 Select the typ of camera for TX-108 it is WiFi camera.
 For the WiFi configuration of the TX-108 follow the shown steps in the App.
 After finishing the configuration the device is connected to your WiFi router
and is ready to use. The green indicator light is permanently enabled.
Note: For Android phone users, in order to facilitate the configuration, App will
obtain the WIFI information surrounding. So the Smartphone will ask whether
to allow the application to obtain relevant permission. Click “Allow”.
Indicator light (if the device is connected to power):
LED flashes every 0.5s = STA Pairing mode
LED flashes slowly every 2s = AP (Hotspot) mode
LED is permanently on = WiFi configuration successfully

Technaxx TX-108 Specifications

General

Brand	Technaxx
Model	TX-108
Category	Security Camera
Language	English