Technaxx TX-108 User Manual

16
Available capacity
Shows available storage capacity of MicroSD card.
Format
Click it to format the MicroSD card. The procedure is about
3-5 minutes and is not blocked by other operation. Note: 64
-128GB must be formatted via the App! It could be necessary
to format until the App shows MicroSD status: Normal.
Password
Modify the password of user admin by filling in new password.
Blank means no modification.
6.1.2 Playback: Click the button of remote playback in the live view.
Precondition of TX-108 remote playback:
 Make sure the camera time is already time synchronized with the App 
Insert the suitable MicroSD card into the camera.  Setup recording schedule
and enable time video OR (not necessary to setup recording schedule and)
enable motion detection recording. None of these three conditions can be
omitted. Remote playback function of the device then only can be used.
 Choose the time by swiping the timeline left and right. The red cursor
marks the start time of playback.  Two fingers touch the timeline & move
outward to narrow the time scale. Two fingers touch the timeline and
move inward to enlarge the time scale.  Press play in the middle of the
shown image to start the playback
6.1.2 Playback Interface
6.2 My center Interface

Technaxx TX-108 Specifications

General

Brand	Technaxx
Model	TX-108
Category	Security Camera
Language	English