9
Model: TX-247 Article No. 5073, 03/2023
Registration
→ Open the S-Miles Installer App on your device.
→ Register Account.
1. On the login interface, click on “No Account” to enter registration
page.
Note: Turn on your GPS, enable the location service for S-Miles
Installer App.
2. Click “Register” to go to the registration page. Click “Go to set” and
you will be directed to the WiFi page of your Smartphone. Make sure
you select the DTU (AP mode) wireless network (DTUL-XXXXXXX).
3. The DTU SN will be automatically filled in after you join the DTU
network. Click “Go to set” and you will be automatically disconnected
from the DTU.
4. Connect to your home network (or use your traffic data) and fill in the
information required.
• Email: Enter your email address you want to bind with the account.
Click on Send. Type in the verification code sent to your email and
complete the account creation.
• Login Account = Username, needed for login. Freely selectable.
• New Password = Enter a password for the account. Length needs
to be 6-20 characters and can include letters, numbers and
special characters.
• Confirm Password = Repeat the password.
Click on Register to finish. Now go to next step to set up your plant.
To Next Page
Loading...
Need help?
General