EasyManuals Logo

Techne Prime User Manual

Techne Prime
67 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
6
ENVIRONMENTAL CONDITIONS
The Prime is designed operate under the following conditions:
Indoor use
Ambient temperature range +5ºC to +40ºC
Altitude to 2000m
Relative humidity not exceeding 80%
Mains supply fluctuations not exceeding 10%
Over voltage category II IEC 60364-4-443
Pollution degree 2
Note: The control specifications are quoted at an ambient temperature of 20ºC. The specification
may deteriorate outside an ambient temperature of between 10ºC and 30ºC.
The instrument has been tested for radio frequency interference and is certified under EN61326.
WARRANTY
Bibby Scientific Ltd warrants this instrument to be free from defects in material and workmanship,
when used under normal laboratory conditions for four (4) years. In the event of a justified claim,
Bibby Scientific Ltd will replace any defective component or replace the unit free of charge. This
warranty does not apply if damage is caused by fire, accident, misuse, neglect, incorrect adjustment
or repair, damage by incorrect installation, adaption, modification, fitting of non-approved parts or
repair by unauthorised personnel. Bibby Scientific Ltd liability is limited to the cost of repair or
replacement of the product and excludes in particular, indirect and consequential loss, damage,
costs or expenses, including but not limited to wasted time, materials and expenditure or loss of use,
profit, production, revenue, expected savings or goodwill. To make a claim please contact the
supplier of the instrument. This warranty is in addition to, and does not affect any statutory rights.
This manual has been prepared for the convenience of Techne’s customers and nothing in this
manual shall be taken as a warranty, condition or representation concerning the description,
merchantability, fitness for purpose or otherwise of the unit or components.
Notwithstanding the description and specification(s) of the instruments contained in the operator’s
manual, Techne reserves the right to make such changes as it sees fit to the instruments or to any of
the components.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Techne Prime and is the answer not in the manual?

Techne Prime Specifications

General IconGeneral
BrandTechne
ModelPrime
CategoryLaboratory Equipment
LanguageEnglish

Related product manuals