10
For bikes with rear suspension, the seat post
should never come in contact with the spring ele-
ment located on the back wheel.
Setting up the position of the
handlebars / stem
Various types of stem are used on bicycles:
Quill stem
Height adjustment possible
Changing the position of the stem
also changes the position of the
handlebars. You should always be
able to safely reach and use grips and con-
trols. Please ensure that all cables and lines
are long enough to allow you to turn the han-
dlebars in every possible way.
Threadless stem
Height change possible as follows:
• Exchange of tted spacers under or above the
stem
• Turning of the stem
• Exchange of the stem
Only to be carried out by a special-
ised dealer
Adjustable stem
Adjustment of stem tilt possible
Please ensure that you read the
manufacturer’s operating manual
for your stem. Only allow specialists
to work on your handlebars and stem, do not
attempt to do this yourself!
BMX bicycles are ridden in a stand-
ing position. Please ask your spe-
cialised dealer which riding position
is suitable for you.
Setting up the brake levers
Set up your brake levels in such a way that you
can safely apply them and brake comfortably.
Please familiarise yourself with which lever oper-
ates which brake!
Some brakes are now equipped with power mod-
ulators. This guards against “overbraking” and
any dangerous locking of the wheels.
To Next Page
Loading...