EasyManua.ls Logo

Technibike E-MTB - Environmental Protection Tips; Inspections

Default Icon
47 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
36
Environmental protection tips
General care and cleaning products
Please take the environment into account when
caring for and cleaning your bicycle. You should
use care and cleaning products which are biode-
gradable wherever possible. Please ensure that
no cleaning uid enters the drainage system.
When cleaning the chain, use a suitable chain
cleaning tool and dispose of chain lubricant prop-
erly at a suitable waste disposal site.
Brake cleaner and lubricants
Take the same approach to using brake clean-
er and lubricants as you do to general care and
cleaning products.
Tyres and inner tubes
Tyres and inner tubes are not residual waste or
domestic rubbish and have to be disposed of at
your local recycling centre.
Carbon parts and frames
Carbon parts and frames consist of carbon bre
matting stuck together in layers. We recommend
allowing your specialist retailer to dispose of any
discarded carbon parts.
Batteries from pedelecs and e-bikes
Batteries belonging to pedelecs and e-bikes
should be treated as hazardous and are there-
fore subject to compulsory special labelling. They
have to be disposed of by specialist retailers or
manufacturers.
Oil
Bat
tery
Inspections
During the next inspection special care should be
taken for:
____________________________________
____________________________________
____________________________________
____________________________________
Parts that should be changed:
____________________________________
____________________________________
____________________________________
____________________________________
Problems that occured:
____________________________________
____________________________________
____________________________________
____________________________________