4 START OF THE INSTALLATION
The configuration software for this modem can be found on the AT&T ftp server here:
ftp://anonymous@ftp.attglobal.net/pub/MoW_Broadband/
The file name will vary, but always start with TG650. The latest release will have the highest
extension number. This file must be unpacked and the “setup.exe” can be launched. This then
presents a menu panel shown below in Illustration 4.1
To configure the modem, please connect your PC to one of the yellow LAN ports of the modem.
If this is the first time you configure the DSL device, click on “Initial setup”. If you already have
configured the DSL device before and you want to change some settings, select “Reconfigure
my gateway”.
4.1
4.1
Initial Setup
Initial Setup
When selecting “Initial setup” the following screen will appear:
ATT_TG650s_Quick_Install_Guide Page 13
To Next Page
Loading...
Need help?
General
