3 PHYSICAL INSTALLATION
This chapter describes the physical installation of the TG789VAC v2 Technicolor Gateway
model, hereafter called “DSL-device”.
3.1 Package description
The following items should be present in the Do-It-Yourself (DiY) package:
• 1 Technicolor TG789VAC v2 gateway box containing:
◦ 1 TG789VAC v2 modem
◦ 1 PSU
◦ 1 RJ11 cable
◦ 1 RJ45 Cat5e Ethernet straight cable
• Country localization kit containing
◦ 3 RJ 11 Straight Cables 2x 3 meters, 1x 5 meters
◦ 1 wall-socket converter if applicable
◦ 1 Splitter
◦ 1 PSU socket converter if applicable
◦ 1 Welcome letter
Examples of the RJ 45 and RJ-11 connectors:
Depending on the voice line present in the location, analogue or ISDN, the installation description differs. In some
countries the caretaker of the local loop, the actual wire-pair to the home, will install the splitter. If so, then this part
will not be included in the DiY package.
Figure 1 RJ-11 (left) and RJ-45 (right) connector.
The RJ-11 has 4 wires, the RJ-45 has 8 wires.
To Next Page
Loading...
