Operation
Using the detachable cord (supplied)
W hile the power is turned off or the battery has no rem aining
charge, this unit can be used as norm al headphones by
connecting the detach able cord (supplied).
• Before connecting the detachable cord (supplied), lower the
volume on the connected device.
• If you connect the detachable cord (supplied) when connected via
Bluetooth®, the Bluetooth® connection will be lost.
• The Multi function button does not work even while the unit is
turned on.
• Noise may occur due to dirt on the plug. Clean the plug with a soft
dry cloth if this occurs.
• Do not use any other detachable cords except the supplied one.
■ To connect to an airplane audio system
1 Connect the unit and the detachable cord
(supplied). (Q )
2 Connect the input plug (0 ) of the detachable
cord (supplied) to the airplane adaptor (supplied) (Q )
3 Connect the airplane adaptor to the in-airplane audio system. (0 )
Note
•T h e airplane adaptor may not fit the jacks in some in-airplane audio systems.
Resetting the unit
This unit can be reset w hen all operation s are rejected. To reset the unit, press and hold [ Í / l] for 10 seconds or
more. All the previous operation s will be canceled. (The pairing device inform ation will not be deleted.)
• The unit cannot be reset immediately after turning on the power of the unit. W ait about 30 seconds.
21
To Next Page
Loading...
