Other
Restoring to the factory settings
W h en you w an t to delete all pairing device information, etc. in this unit, you can restore this unit to the factory
settings (original settings upon purchase).
1 While the power is turned off, press and hold [ Í / l ] for at least 7 seconds until the LED
indicator lights alternately in blue and red.
2 Release your finger from [Í/l] .
3 Press and hold [ Í / l ] and [+] for at least 5 seconds.
• The default settings will be restored after the LED indicator (blue) blinks fast and the unit turns off.
■ Attention
•W hen pairing a device again, delete the registering information (Device: “EAH-A800”) from the Bluetooth® device's
menu, and register this unit with the Bluetooth® device again. ( l 13)
• Some setting values, such as the language settings for voice prompts and Amazon Alexa, are kept.
22
To Next Page
Loading...
