24
(Continued)
Note
• This unit will be displayed as “Technics-
SC- C50 -
****
” if the device name is not set.
(“
****
” stands for characters unique to each set.)
• You can check your network information (SSID,
MAC address and IP address) from the “Google
Home” app or “Technics Audio Center” app.
• Some items on the “Google Home” app are
irrelevant to this unit.
• Press [
] to cancel the Wi-Fi setting.
• When this unit is turned off and on before the Wi-
Fi setting is complete, “Wi-Fi Setup” is displayed
again. Perform the Wi-Fi setting or set the Wi-
Fi function to “Off” so that it is not displayed
thereafter.
• To switch the Wi-Fi function between “On” and
“Off”, cancel the Wi-Fi setting, press and hold the
volume [
] on the top while pressing [•DIMMER /
-INFO] on the rear of this unit for approx.
5 seconds.
• For other connection methods (⇒ 25).
To Next Page
Loading...
Need help?
General
