Technics RS-TR979 - ADJUSTMENT PROCEDURE; Writing to EEPROM

RS-TR979
( Controls applicable to tape deck 1 and/or 2
(0) Cassette holder
(g> ATC button (ATC)
This button is used to perform ATC (auto tape calibration).
(See page 13.)
[For RS-TR777: deck 2 only]
(0) Tape counter buttons
(COUNTER 1/COUNTER 2)
MODE: This button is used to select the tape/linear
counter indication.
RESET: This button is used to reset the tape counter
indication to "000_'7"00.00”.
(See page 10.)
® Automatic-record-muting button
(O AUTO REC MUTE)
This button is used to make a silent interval on the tape while
recording is in progress. (See page 17.)
(For RS-TR777: deck 2 only]
@ Record button <• REC)
This button is used to set deck to the recording stand-by
mode. (See page 12.)
[For RS-TR777: deck 2 only]
. .. )
® Reverse-side playback button (-4)
This button is used to start the playback or recording of side
"B" of the cassette.
(The tape will move in the right-to-left direction.)
(g) Stop button ( ■ )
This button is used to stop the tape movement.
(§) Forward-side playback button < ► )
This button is used to start the playback or recording of side
“A" of the cassette.
(The tape will move in the left-to-right direction.)
® Open/ciose button (a OPEN/CLOSE)
This button is used to open or close the cassette holder.
© Rewind/fast-forward search buttons
( ◄◄ / ► > TPS)
These buttons are used to advance or rewind the tape, or to
easily and quickly search for the program's beginning of the
tape. (See page 11.)
® Pause button (||)
This button is used to temporarily stop the tape playback or
recording.
[For RS-TR777: deck 2 only]